Installing a front license plate on your Nissan Sentra sometimes seem like a simple task, but it’s more that. There is need to ensure that it is done properly to avoid any damage to your vehicle.

Whether you’re replacing a lost plate or adding one for the first time, following the correct steps can help ensure a secure and clean installation.

Here is how to put front license plate on your Nissan Sentra.

Before installing a front license plate on a Nissan Sentra, you will need these few basic tools and the following steps.

Materials Needed

  • Front License Plate
  • License plate mounting bracket
  • Screws and bolts
  • Screwdriver or socket wrench
  • Towel or cloth to protect the vehicle’s surface.

Step-By-Step Guide On How To Put Front License Plate On Nissan Sentra

1.     Identify the front license plate mounting location

Check your Nissan Sentra’s front bumper to locate the pre-drilled holes or mounting point for the front license plate. These holes are usually located in the center of the bumper.

2.     Attach the license plate to the mounting bracket

If your vehicle does not have a built-in license plate bracket, you will need to attach the plate to a separate mounting bracket. Place the license plate onto the bracket and align the hole on the plate with the holes on the bracket.

3.     Secure the license plate to the bracket

Use screws and bolts to tighten the license plate to the mounting bracket. Ensure the plate is securely fastened to the bracket to prevent it from coming loose while driving.

4.     Position the license plate on the front bumper

Line up the mounting holes on the bracket with the pre-drilled holes or mounting points on the front bumper of your Nissan Sentra. Place a cloth or towel between the bracket and the bumper to protect the car from scratches.


5.     Attach the bracket to the front bumper

Insert the screws or bolts through the bracket and into the pre-drilled holes on the bumper. Use a screwdriver or socket wrench to tighten the screws or bolts very well.

6.     Check the alignment and tightness

Ensure the license plate is straight and well attached to the front bumper. Double-check the tightness of the screws or bolts and make sure it is firmly in place.

7.     Test the installation

Give the license plate a gentle tug to ensure it is securely mounted. Also, make sure it does not rattle or move when the vehicle is in motion.


The process of installing a front license plate on your Nissan Sentra is a simple one. By following the guidelines mentioned above, you can easily install your Nissan Sentra front license plate without stress.



Leave a Comment