HOW TO DISABLE VSC IN A TOYOTA SEQUOIA

Vehicle Stability Control (VSC) in a Toyota Sequoia is a safety feature designed to help drivers maintain control of the vehicle during challenging driving conditions.

Disabling the VSC in a Toyota Sequoia can be useful in certain driving conditions where you may want to have more control over the vehicle’s handling, such as when driving on rough terrain or in deep snow.

In this post, you’ll learn how to disable VSC in a Toyota Sequoia to prevent skidding and loss of traction.

Easy-To-Do Process On How To Disable VSC In A Toyota Sequoia

 

Locate the VSC Button

The VSC button is usually located on the dashboard or the center console of the Toyota Sequoia. It may be labelled as ‘’VSC Off’’, ‘’VSC TRAC’’ or ‘’Traction Control’’.

Turn on the Ignition

Insert the key into the ignition and turn it to the ‘’On’’ position without starting the Engine. If there is no problem with your Toyota Sequoia, press the start button once without pressing the brake.

Press the VSC Button

Press the VSC button to turn off the VSC system. You may need to hold the button for a few seconds to completely disable VSC.

Check VSC Indicator

After VSC is turned off, the VSC indicator light on the front panel will illuminate indicating that the system is off. This light alerts you that VSC has been disabled and should be re-enabled when it is safe to do so.

Related Post>>>>HOW TO FIX LOW BRAKING POWER ON TOYOTA HIGHLANDER

Drive the Vehicle

When VSC is disabled, please drive carefully, especially on rough roads. Without VSC, the vehicle’s stability and traction control systems will not intervene, so be cautious and adjust your driving style accordingly.

Re-Activate VSC

Simply press the VSC button again to re-enable the VSC system. The VSC indicator light should go off, indicating that the system is active and providing stability and control assistance.

Conclusion

It is important to remember that disabling VSC on the Toyota Sequoia is only necessary in situations where additional control is required, such as when driving in deep snow or over rough terrain. Remember to drive safely and reset the VSC when returning to the original route.

Leave a Comment